In modern process industries such as water treatment, petrochemical refining, pharmaceuticals, and specialty chemical production, accurate chemical dosing is a critical control parameter. Even slight deviations in injection rates can directly affect reaction efficiency, product quality, regulatory compliance, and equipment lifespan.
To address these demanding requirements, the PR Series Metering Pump is engineered to deliver stable and precise chemical injection performance under varying operating conditions.
Developed by Flowell (Shanghai) Industrial, the PR Series integrates mechanical precision design with industrial-grade durability, ensuring reliable dosing performance across a wide range of process applications.
Variable Eccentric Drive: The Core Engineering Principle
At the center of the PR Series Metering Pump is a variable eccentric drive mechanism, designed to provide controlled displacement with high mechanical stability.
Unlike fixed-stroke pumping systems, this structure allows stroke adjustment by changing the eccentric position of the drive shaft. This results in:
- Precise and fine stroke length control
- Smooth and stable mechanical movement
- Reduced pulsation fluctuations
- Improved long-term operational durability
By adjusting eccentric offset rather than motor speed, the system modifies output volume per stroke while maintaining consistent rotational performance.
This mechanical approach ensures reliable dosing accuracy across a broad operational range.
High-Precision Flow Control: ±1% Steady-State Accuracy
One of the key performance characteristics of the PR Series is its ability to maintain ±1% steady-state accuracy from 10% to 100% of nominal flow capacity.
This level of precision is achieved through:
- High-precision machining of internal components
- Optimized check valve structure
- Controlled plunger or diaphragm motion
- Stable alignment of drive assemblies
Such accuracy is essential in applications where dosing errors can have significant consequences, including:
- Chlorine dosing in water treatment systems
- Catalyst injection in petrochemical processes
- pH adjustment systems
- Polymer and flocculant dosing
- Corrosion inhibitor injection
In these environments, over-dosing increases operational cost and environmental impact, while under-dosing reduces process efficiency.
Wide Industrial Compatibility
The PR Series Metering Pump is designed to handle a wide range of chemical media, including:
- Corrosive acids and alkalis
- Oxidizing agents
- Flocculants and coagulants
- High-viscosity polymers
- Specialty chemical additives and solvents
Depending on process requirements, wetted parts can be configured using:
- Stainless steel
- Engineering plastics
- Specialized corrosion-resistant alloys
This ensures compatibility with diverse industrial environments while maintaining system integrity.
Flexible Flow Adjustment and Operational Range
A key advantage of the PR Series is its wide turndown ratio, operating efficiently from 10% to 100% of rated capacity.
This enables operators to:
- Adjust dosing in real time based on process demand
- Scale production without replacing equipment
- Optimize chemical consumption efficiency
- Maintain stable operation under changing system conditions
Unlike purely electronic flow control systems, the PR Series relies on mechanical stroke adjustment, ensuring volumetric consistency even in unstable electrical or environmental conditions.
Durability and Maintenance Efficiency
Industrial metering systems must operate continuously under demanding conditions. The PR Series is built with durability as a core design principle:
- Reinforced drive housing structure
- Balanced eccentric load distribution
- Long-life bearing systems
- High-performance sealing components
The variable eccentric mechanism also reduces internal stress concentration, helping to minimize wear and extend service life.
In addition, the pump is designed for easy maintenance access, allowing routine servicing with minimal downtime—an important factor for continuous process industries.
Industrial Applications Across Key Sectors
The PR Series Metering Pump is widely used in:
Water Treatment Systems
Ensures precise chemical dosing for disinfection, pH control, and coagulation processes.
Petrochemical Industry
Supports catalyst injection, additive dosing, and corrosion control systems.
Pharmaceutical Manufacturing
Provides accurate and repeatable dosing for sensitive formulation processes.
Chemical Processing Plants
Handles a wide range of aggressive and specialty chemicals with stable performance.
Why Flowell (Shanghai) Industrial
Flowell (Shanghai) Industrial focuses on delivering engineered dosing solutions designed for real industrial environments. The PR Series reflects this philosophy through:
- Precision manufacturing of mechanical components
- Strict quality control throughout production
- Application-specific configuration options
- Industrial-grade reliability standards
- Technical support and engineering consultation
Rather than offering generic pumping equipment, Flowell provides application-driven metering solutions designed for long-term operational stability.
Conclusion: Precision That Drives Process Stability
In chemical dosing systems, accuracy is not optional—it is fundamental to process success. The PR Series Metering Pump delivers ±1% steady-state accuracy, supported by a robust variable eccentric drive system that ensures stable and repeatable performance across a wide operating range.
With strong chemical compatibility, mechanical reliability, and flexible flow control, the PR Series from Flowell (Shanghai) Industrial provides a dependable solution for critical dosing applications.
For engineers and operators seeking consistent chemical injection performance, the PR Series represents a balance of precision, durability, and operational confidence in modern industrial systems.